top of page

Power Point Installation in Hurstville & St George

Running out of power points? Relying on power boards and extension cords? SOTA Group Electrical installs new power points, upgrades old ones and fixes faulty outlets across Hurstville, Kogarah, Rockdale, Bexley, Sylvania and the wider St George area.

​

Every job is done by a licensed electrician (NSW Licence 309457C), tested before we leave and completed to AS/NZS 3000. Whether you need one extra point behind the TV or a full kitchen upgrade, we'll put power exactly where you need it.

​

  • New power points, double upgrades and replacements

  • USB, outdoor and 15 amp power points

  • Clear, upfront quote before any work starts

  • 85+ five-star Google reviews from local customers

IMG_1450.HEIC

Our Power Point Services

New Power Point Installation

Need power where you don't have it? We install new power points in kitchens, bedrooms, home offices, garages and laundries. We check your circuits can take the extra load, find the neatest cable path and set each point at a practical height.

Single to Double Power Point Upgrades

Single outlets are a common reason homes end up full of double adaptors. In most cases we can swap a single for a double power point in place, giving you twice the outlets without new wiring runs.

USB and USB-C Power Points

Charge phones, tablets and watches straight from the wall, without bulky adaptors. We install USB-A and USB-C power points in bedrooms, kitchens, offices and living areas, in finishes that match your existing switches.

Outdoor and Weatherproof Power Points

Patios, alfresco areas, BBQs, gardens, pool equipment and sheds need outlets built for the weather. We install weatherproof power points, positioned and sealed to meet Australian Standards.

15 Amp and Dedicated Circuits

Larger air conditioners, heaters, pool pumps and workshop tools often need a 15 amp power point on its own circuit. We check the appliance and your switchboard, then install the right outlet.

Power Point Repairs

Cracked, loose, burnt or dead power points are a safety risk. We replace damaged outlets with modern fittings and find the cause if a point stops working or keeps tripping the power.

Why Add More Power Points?

Most St George homes were built long before phone chargers, home offices, air fryers and smart TVs. One double power point per room was once enough. Today it rarely is.

​

Power boards and double adaptors fill the gap, but they are not a long-term fix. Plugging too much into one outlet can overload it and make the plug and wall plate heat up, which increases the risk of fire. Adding properly installed power points spreads the load across your circuits, clears away the clutter and makes every room easier to use.

Power Point Safety and Planning

Warning Signs to Look For

Scorch marks, a warm wall plate, a burning smell, buzzing, sparks or plugs that fall out can all point to a loose connection or an overloaded circuit. In older homes they can also mean the wiring is due for a check. If you notice any of these, stop using the outlet and call a licensed electrician.

Why You Shouldn't DIY

In NSW, installing, moving or replacing a power point is electrical work that must be done by a licensed electrician. DIY electrical work is illegal, can void your home insurance and puts your family at risk of shock or fire. Every power point SOTA installs is tested and certified, so you know it is safe and compliant.

Planning Power Points for a Renovation

Renovating is the best time to plan your power points, because the walls are open and adding outlets is quicker and neater. Think about where the TV, desk, bedside tables and kitchen appliances will go, and we will place points where they will actually be used.

Our Installation Process

clipboard-clock.png
Quote and plan

Tell us how many power points you need and where. We check your switchboard and circuits, then give you a clear written quote.

zap (2).png
Choose your outlets

We help you choose double, USB, outdoor or 15 amp power points, in a finish that suits each room.

hammer.png
Install

We run the cabling neatly, with as little wall damage as possible, and fit each point at a practical height.

badge-check.png
Test

We test every outlet and circuit, show you what has been done and clean up before we leave.

Why St George Homeowners and Landlords Choose SOTA

  • Local to St George. Based in the Georges River area, so we get to you fast.

  • Licensed and insured. NSW Licence 309457C. All work done to AS/NZS 3000.

  • Over 12 years' experience in residential, commercial and industrial electrical work. 

  • 85+ five-star Google reviews.

  • Business Awards finalist in 2025 and 2026.

  • One team for all your electrical work. Combine your new power points with ceiling fans, LED lighting or a switchboard upgrade in one visit.

  • 10% off for seniors on all electrical work.

Power Point FAQs

  • Can I install a power point myself?
    No. In NSW, installing, moving or replacing a power point must be done by a licensed electrician. DIY electrical work is illegal, can void your home insurance and risks shock or fire.
     

  • What affects the cost of installing a power point?
    The main factors are how many points you need, where they are going and how easy it is to run the cable. Adding a point next to an existing one is usually quicker than running a new cable through brick walls or across the house. USB, outdoor and 15 amp points also cost more than a standard double outlet. We give you a clear quote before any work starts.
     

  • How long does it take to install a power point?
    A single power point is often installed in under an hour where access is easy. Several points, brick walls or a new circuit can take longer. We give you a time estimate with your quote.
     

  • Can you add USB ports to my existing power points?
    Yes. We can replace your existing power points with USB or USB-C models, usually without any new wiring.
     

  • Can you install power points outside?
    Yes. We install weatherproof outdoor power points for patios, alfresco areas, BBQs, gardens, garages and pool equipment, sealed to suit outdoor conditions.
     

  • Do I need a 15 amp power point?
    You need a 15 amp point if an appliance has a larger 15 amp plug, which is common on bigger air conditioners, heaters, pool pumps and workshop tools. A standard 10 amp outlet can't take these plugs. We check the appliance and your switchboard, then install the right outlet and circuit.
     

  • Is it safe to use power boards instead of adding power points?
    Power boards are fine for light, short-term use, but relying on them long-term can overload an outlet and cause overheating. If you are using several power boards, it is safer to add more power points.

Get a Free Power Point Quote

Ready to get rid of the power boards? Tell us how many power points you need and where, and we'll give you a clear, upfront quote.

Urgency
bottom of page